42 Search Results

Abstract Stretchable polymer semiconductors (PSCs) have seen great advancements alongside the development of soft electronics. But it remains a challenge to simultaneously achieve high charge carrier mobility and stretchability. Herein, we report the finding that stretchable PSC thin films (<100-nm-thick) with high stretchability tend to exhibit multi-modal energy dissipation mechanisms and have a large relative stretchability ( rS ) defined by the ratio of the entropic energy dissipation to the enthalpic energy dissipation under strain. They effectively recovered the original molecular ordering, as well as electrical performance, after strain was released. The highest rS value with a model polymer (P4)more » exhibited an average charge carrier mobility of 0.2 cm ² V ⁻¹ s ⁻¹ under 100% biaxial strain, while PSCs with low rS values showed irreversible morphology changes and rapid degradation of electrical performance under strain. These results suggest rS can be used as a parameter to compare the reliability and reversibility of stretchable PSC thin films.« less

Carbon superstructures are widely applied in energy and environment-related areas. Among them, the flower-like polyacrylonitrile (PAN)-derived carbon materials have shown great promise due to their high surface area, large pore volume, and improved mass transport. In this work, we report a versatile and straightforward method for synthesizing one-dimensional (1D) nanostructured fibers and two-dimensional (2D) nanostructured thin films based on flower-like PAN chemistry by taking advantage of the nucleation and growth behavior of PAN. The resulting nanofibers and thin films exhibited distinct morphologies with intersecting PAN nanosheets, which formed through rapid nucleation on existing PAN. We further constructed a variety ofmore » hierarchical PAN superstructures based on different templates, solvents, and concentrations. These PAN nanosheet superstructures can be readily converted to carbon superstructures. As a demonstration, the nanostructured thin film exhibited a contact angle of ~180° after surface modification with fluoroalkyl monolayers, which is attributed to high surface roughness enabled by the nanosheet assemblies. In conclusion, this study offers a strategy for the synthesis of nanostructured carbon materials for various applications.« less

Flower-like polyacrylonitrile (PAN) particles have shown promising performance for numerous applications, including sensors, catalysis, and energy storage. However, the detailed formation process of these unique structures during polymerization has not been investigated. Here, we elucidate the formation process of flower-like PAN particles through a series of in situ and ex situ experiments. We have the following key findings. First, lamellar petals within the flower-like particles were predominantly orthorhombic PAN crystals. Second, branching of the lamellae during the particle formation arose from PAN's fast nucleation and growth on pre-existing PAN crystals, which was driven by the poor solubility of PAN inmore » the reaction solvent. Third, the particles were formed to maintain a constant center-to-center distance during the reaction. The separation distance was attributed to strong electrostatic repulsion, which resulted in the final particles' spherical shape and uniform size. Lastly, we employed the understanding of the formation mechanism to tune the PAN particles' morphology using several experimental parameters including incorporating comonomers, changing temperature, adding nucleation seeds, and adjusting the monomer concentration. Here these findings provide important insights into the bottom-up design of advanced nanostructured PAN-based materials and controlled polymer nanostructure self-assemblies.« less

Regulating the crystallization of donor and acceptor to maintain balanced carrier mobility is of great importance to fabricate efficient organic solar cells (OSCs). Herein, the balanced crystallinity between donor and acceptor was finely controlled in blade-coated OSCs. By adding high crystalline FOIC into PBDB-T:ITIC system, a balanced carrier mobility was achieved, resulting in the much improved fill factor. The optimized ternary device exhibits an increased current density, due to the enhanced light-harvesting efficiency with complementary absorption and the morphology change. Morphology characterization demonstrated that the ternary film exhibits a highly balanced crystallinity between the donor and acceptor on account ofmore » the formation of acceptor alloy. Moreover, the ternary film not only possesses a small domain size, but also exhibits a high domain purity as compared to both binary films. Encouragingly, a highest power conversion efficiency (PCE) of 10.68% was obtained for the blade-coated ternary OSCs. In addition, the blade-coated flexible large-area (105 mm²) OSC based on PBDB-T:ITIC:FOIC ternary system also exhibits a high PCE of 9.81%, showing great potential in the high-throughput fabrication of OSCs.« less

We report that improving the morphology of bulk heterojunction active layers remains a primary challenge for organic photovoltaics (OPVs), and much research has been devoted to achieving this through modifying OPV casting solutions to control film formation and crystallinity. Yet, the solution conformation of conjugated polymers used in OPVs is largely unknown. Here, we report observations of temperature dependent aggregation (TDA) through small-angle X-ray scattering (SAXS) investigations of polymer conformation in chlorobenzene:dichlorobenzene casting solvent as a function of temperature for PffBT4T-2OD, a polymer known to display TDA, and its derivative PffBT3T-2OD which displays significantly reduced TDA. We find that, uponmore » cooling below 80 °C, PffBT4T-2OD forms large crystalline aggregates in solution, while its derivative PffBT3T-2OD forms mostly amorphous aggregates of similar size with some evidence of short-range order. This change in solution aggregation behavior is reflected in the lack of gelation by PffBT3T-2OD upon film deposition by spin coating. Grazing-incidence wide-angle X-ray scattering (GIWAXS) revealed a preferred face-on π–π stacking orientation for PffBT3T-2OD films while PffBT4T-2OD's π–π stacking peak was isotropic. We combine these findings to suggest that the presence of crystalline seed aggregates in PffBT4T-2OD solution quickly form an isotropic crystallite network upon cooling while PffBT3T-2OD's amorphous aggregates more slowly crystallize resulting in improved processability of PffBT3T-2OD.« less

Shape memory polymers are promising materials in many emerging applications due to their large extensibility and excellent shape recovery. However, practical application of these polymers is limited by their poor energy densities (up to ~1 MJ/m³). Here, we report an approach to achieve a high energy density, one-way shape memory polymer based on the formation of strain-induced supramolecular nanostructures. As polymer chains align during strain, strong directional dynamic bonds form, creating stable supramolecular nanostructures and trapping stretched chains in a highly elongated state. Upon heating, the dynamic bonds break, and stretched chains contract to their initial disordered state. This mechanismmore » stores large amounts of entropic energy (as high as 19.6 MJ/m³ or 17.9 J/g), almost six times higher than the best previously reported shape memory polymers while maintaining near 100% shape recovery and fixity. The reported phenomenon of strain-induced supramolecular structures offers a new approach toward achieving high energy density shape memory polymers.« less

In this report translating all-polymer solar cells from spin-coating to scalable roll-to-roll-compatible fabrication techniques is a critical step toward the application of organic photovoltaics at a scale. Techniques to control polymer crystallization and phase separation during solution printing are essential to obtain high-performance printed organic solar cells. Here, we demonstrate a novel solvent additive approach employing trace amounts of phthalates as additives to control polymer crystallinity and suppress unfavorable phase separation in a representative PTB7-Th/P(NDI2OD-2T) all-polymer solar cell. The best-performing additive increased the blade-coated device performance from 2.09 to 4.50% power conversion efficiency, an over twofold improvement, mitigating the lossmore » in performance that is typically observed during process transfer from spin-coating to blade-coating. It is suggested that the improved device performance stems from a finer polymer phase-separation size and overall improved active layer morphology, evidenced by device characterization data and indirectly supported by grazing incidence wide-angle X-ray scattering analyses. Real-time X-ray diffraction measurements during blade-coating provide mechanistic insights and suggest that the dioctyl phthalate additive may act as a compatibilizer, reducing the demixing of the donor and acceptor polymer during film formation, enabling a smaller phase separation and improved performance. The structural diversity of the class of phthalate additives makes this simple yet effective concept promising for translating other all-polymer material systems to blade-coating and other scalable printing techniques.« less

We report in order to apply polymer semiconductors to stretchable electronics, they need to be easily deformed under strain without being damaged. A small number of conjugated polymers, typically with semicrystalline packing structures, have been reported to exhibit mechanical stretchability. Herein, a method is reported to modify polymer semiconductor packing-structure using a molecular additive, dioctyl phthalate (DOP), which is found to act as a molecular spacer, to be inserted between the amorphous chain networks and disrupt the crystalline packing. As a result, large-crystal growth is suppressed while short-range aggregations of conjugated polymers are promoted, which leads to an improved mechanicalmore » stretchability without affecting charge-carrier transport. Due to the reduced conjugated polymer intermolecular interactions, strain-induced chain alignment and crystallization are observed. By adding DOP to a well-known conjugated polymer, poly[2,5-bis(4-decyltetradecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-(E)-1,2-di(2,2 '-bithiophen-5-yl)ethene] (DPPTVT), stretchable transistors are obtained with anisotropic charge-carrier mobilities under strain, and stable current output under strain up to 100%.« less

All-polymer solar cells (all-PSCs) based on polymerized small molecular acceptors (PSMAs) have made significant progress recently. Here, we synthesize two A-DA’D-A small molecule acceptor based PSMAs of PS-Se with benzo[c][1,2,5]thiadiazole A’-core and PN-Se with benzotriazole A’-core, for the studies of the effect of molecular structure on the photovoltaic performance of the PSMAs. The two PSMAs possess broad absorption with PN-Se showing more red-shifted absorption than PS-Se and suitable electronic energy levels for the application as polymer acceptors in the all-PSCs with PBDB-T as polymer donor. Cryogenic transmission electron microscopy visualizes the aggregation behavior of the PBDB-T donor and the PSMAmore » in their solutions. In addition, a bicontinuous-interpenetrating network in the PBDB-T:PN-Se blend film with aggregation size of 10~20 nm is clearly observed by the photoinduced force microscopy. The desirable morphology of the PBDB-T:PN-Se active layer leads its all-PSC showing higher power conversion efficiency of 16.16%.« less

Semitransparent organic photovoltaic cells (ST-OPVs) are emerging as a solution for solar energy harvesting on building facades, rooftops, and windows. However, the trade-off between power-conversion efficiency (PCE) and the average photopic transmission (APT) in color-neutral devices limits their utility as attractive, power-generating windows. A color-neutral ST-OPV is demonstrated by using a transparent indium tin oxide (ITO) anode along with a narrow energy gap nonfullerene acceptor near-infrared (NIR) absorbing cell and outcoupling (OC) coatings on the exit surface. The device exhibits PCE = 8.1 ± 0.3% and APT = 43.3 ± 1.2% that combine to achieve a light-utilization efficiency of LUEmore » = 3.5 ± 0.1%. Commission Internationale d’eclairage chromaticity coordinates of (0.38, 0.39), a color-rendering index of 86, and a correlated color temperature of 4,143 K are obtained for simulated AM1.5 illumination transmitted through the cell. Using an ultrathin metal anode in place of ITO, we demonstrate a slightly green-tinted ST-OPV with PCE = 10.8 ± 0.5% and APT = 45.7 ± 2.1% yielding LUE = 5.0 ± 0.3% These results indicate that ST-OPVs can combine both efficiency and color neutrality in a single device.« less